HOME > Electric Discharge Machines > EDM Die Sinking > CNC Die Sinking > CM434C

CM434C

1. Close-loop linear scales feedback on X, Y and Z axis for precise positioning and cutting accuracy.
2. Dialog programming to automaticlly select optimum machining conditions based on electrode size and material, work piece type, depth of cut and desired surface finish.
3. E codes (canned orbit cycles) for commonly used modesi.e., side machining, square, vectoring and circular enlarging, tapering.
4. Automatic edge and center finding, and Z reference location.
5. 3-axis liner, 2-axis arc, 3-axis spiral and 4-axis contouring offset movement.
6. 14"CRT with graphics, RS232, 3 1/2"FDD. Sub-programming.
7. 999 Z-axis automatic machining depths.
8. 99 sets of working parameters available from databaseoperrataor changeable.
9. Low wear power supply.
10.Automatic return to center and back-up function to respond to arcing conditions.

Die Sinking CNC Serial

1.Close-loop linear scales feedback on X Y and Z axis for precise positioning and sparking accuracy.

<>MACHINE BODY
ModelUnitCM434C
Table Size (WxD)mm/inch650x400 / 25.5x15.7
Work Tank Size (WxDxH)mm/inch1050x630x350 / 41.3x24.8x13.8
Table Travel (XxY)mm/inch400x300 / 15.7x11.8
Ram Travel (Z1)mm/inch350 / 13.8
Distance from RAM Platen to work tablemm/inch250-600 / 9.8-23.6
Max. electrode weightkg/lb100 / 220
Max. Workpiece Weightkg/lb1000 / 2200
Outside Dimensionsmm/inch1240x1380x2230 / 48.8x54.3x87.8
Weightkg1400 / 3080
For Dielectric-D434

<>POWER SUPPLY UNIT
ModelUnit50N75N125N150N
Max. machining currentA5075125150
Max. Power InputKVA45910
Max. Machining Speedmm3/min3505509001050
Electrode Wear Rate%0.20.20.20.2
Best Surface Roughness£gm/Ra0.45 0.2(by OB)0.45 0.2(by OB)0.45 0.2(by OB)0.45 0.2(by OB)
Outside Dimensionsmm620x850x1860620x850x1860620x850x1860 + 450x470x1650620x850x1860 + 450x470x1650
Weightkg/lb180 / 396220 / 484400 / 880440 / 968

<>DIELECTRIC
ModelUnitD323D434D655D865D1065D1265
VolumeL2803901300160021003500
FiltermethodPaper FilterPaper FilterPaper FilterPaper FilterPaper FilterPaper Filter
PowerHP0.50.50.5x1 1x10.5x1 1x10.5x1 1x10.5x2 1x1
Weightkg/lbBuilt in80 / 176220 / 484250 / 550350 / 770450 / 990
Outside DimensionsmmBuilt in1400x800x4302500x1000x480 + 1200x600x4802500x1000x480 + 1200x600x480x23000x1000x480 + 1450x500x480x23000x1500x580 + 1800x630x580x2

<>STANDARD ACCESSORIES
ModelUnit
Paper Filterset1
Clamping Kitsset1
Tool Boxset1
Flushing Nozzlesets2
Machine Standset1
Drill Chuckset1
Electrode Holderset1
Halogen Work Lampset1